Hawk - Falcon

Century Hawk - Falcon

Specification:

	Hawk 30/Sport	Hawk Pro 46SE
Length	1168 mm	1206 mm
Main Rotor Dia	1257 mm	1346 mm
Tail Rotor Dia.	236 mm	236 mm
Engine	.28-.36 cu in	.46-.50 cu in
Gear Ratio
Weight	2818 g

Manuals:

Falcon III Manual

Hawk III Manual

Hawk Quick Build

Hawk Sport / Hawk Pro Manual

Hawk SE V1 / V2

Reports

Pod and boom sports model from trainer to mild 3D; designated Hawk for 30-38 size engines and Falcon for 46-50 size engines.

Century Hawk

Developed from the Lion Models Helicat and though it looked very similar only a handful of parts from the original Helicat were retained without some modification and these were the canopy, T/R gearbox , primary gear, swashplate and clutch bell.

Century Hawk 30 flyer 1997 USA magazine advert.

Century Hawk II

No info currently held

Century Hawk III

Hawk III build Manual - 1999

Falcon III build Manual - 2000

Century Hawk Sport

Hawk Sport build Manual - 2002

Hawk Sport quick build guide - 2002

Sport with optional FG canopy and fins

My original Century Hawk Sport (white model bought in early 2007) had an Irvine 36H engine fitted and was very stable in the hover which after learning on '450' size electrics was quite a new experience. I tried my first loop with this model and it was nearly the last flight as it 'stalled' just before reaching the full inverted stage and by keeping full back cyclic on then adding positive pitch as it reached nose down vertical it only just recovered at less than 2M from the ground. Once I had read up a bit more on how to set one up correctly (including making sure it had 'decent' throws, especially negative pitch) it then looped properly and rolled OK.

Century Hawk IV

Hawk IV build Manual - 2003

Century Hawk Pro

Hawk Pro build Manual - 2005