Home Heli History RC Helicopters Heli Gear My Heli's Guest Heli's Workshop RC Magazines Legal Bits Links

Up

Vintage RC Helicopters - Kyosho EP Concept range of RC helicopters

KYOSHO EP Concept

Kyosho EP Concept

Concept EP 

The Concept EP took the electric model helicopter into high performance outdoor flying with a design based on the successfully Concept 30. A powerful AP36L with an 8.4V NiCad gave moderate performance for the tyro whilst increases to a 9.6V NiCad battery give it high speed and an aerobatic performance. Features included: autorotation clutch, strong glass reinforced main frame, aluminium alloy main shaft, metal balls fitted in the swash plate, belt-driven tail rotor, no-slop linkages and bell-hiller pitch control system with an in-line flybar for precise flying. The rotor blades were made from a composite material for top performance. Strong, moulded LSS body plus 20 ball bearings included for minimum friction with the kit being supplied partially assembled from factory.  Control required mini-servos to operate and preferable mini Rx and gyro.

Following on from the basic model was a 'hang on' fuselage of the Hughes 500 using similar principles as the Concept 30 fuselages but this time made of plastic.  Even so the effect was very good and made the helicopter look much bigger than it actually was.

Kyosho EP Concept SR

Concept EP SR

An upgraded version of the original Concept EP that featured a sleeker body, more powerful motor, additional ball bearings for smoother operation and taller main shaft to prevent boom strikes. It also accepted economical standard-size servos and came 85% pre-assembled.

Kyosho EP Concept SR Sport

Concept EP SR Sport

Based on the EP Concept SR but used a fixed-pitch rotor head so only four channel radio was required.  It included the K-Speed motor and had an extra long Aluminium main mast to avoid boom strikes, Blades feature foam cores and factory-bonded skin plus the frame was fibre- reinforced for extra durability. Flapping hinge-type head with reinforced blade grips for precise head control and the Schweizer 300 body give the EP Concept SR Sport a realistic look.

The EP Concept SR Sport used standard size servos and with the addition of a few collective-pitch parts, the machine could be upgraded to full EP Concept SR capability.

Kyosho EP Concept Documentation

EP Concept Build manual and parts list

EP Concept Hughes 500 Instructions

EP Concept SR manual

EP Concept SR manual addendum

EP Concept SR-K Schweizer 300 manual

EP Concept brushless motor addendum

Top of Page        (VRHC - Vintage Radio controlled HeliCopters)

 

Up Concept 30 Concept 60 Concept 32-46 Concept 10 EP Concept Convert Nexus Hyperfly Caliber